How to Unbrick Your Cloudfone Geo 402q [FIRMWARE][FIX][ROM]

Install Cloudfone Geo 402q firmware/stock rom

I hope I can help you with this tutorial

Sometimes your phone won't boot or got stuck in boot logo. This problems may occurs when:
1. Your device was  rooted then you OTA update it . (When you root your device your warranty is void and your service provider have nothing to do with you, you're on your own now so don't update it.)
2. You flashed/installed something that prevents your device from booting normally.


You can fix some issues with this tutorial
1. Fix bootloop
2.System Ui error
3.Phone not booting but detected by computer
4.Forgotten lockscreen pin/password (<< but there must be alternative way for this)

Tools Needed
SP_Flash_Tool_v5.1352.01

Mediatek MT65xx Preloader Driver - so the sp flash tool can detect your device

Cloudfone Geo 402q Firmware >> info:

Cloudfone Geo 402q Firmware alternative link

Rooted with SuperSU
Smart keyboard Pro as system keyboard
Lollipop Fonts
odexed rom (partially touched stock rom just the fonts and keyboard)

I recommend 32bit windows os for sure compatibility of driver 

Installing driver MTK Preloader
1. Turn off your device or simply remove the battery just to make sure.
2. Press volume up or down or both buttons.
3. Insert the usb cable from your computer to your device, it will install automatically drivers.

If your computer can't detect it or can't automatically download drivers,
Go to control panel > hardware and sound > (under devices and printers) click device manager.

It will show the unknown device .

(Assuming that, thats the unknown device but yours will be different icon but its on the same process to install the driver)
 Install it manual. Right click unknown device Icon,

then properties then update driver software.
"Choose Browse my computer for driver software"
Manually find the extracted folder of Mediatek preloader driver

and choose the folder containing the driver,
just wait and windows will install it ...

Flashing Procedure:

1. Extract the firmware you have downloaded.

2. Launch the SP Flash tool (flash_tool.exe).

3. Click the scatter loading choose the android scatter.

4. Flash tool will load the scatter file .

5. Click download.

6. Turn off your phone or just pull the battery,
    you can flash it without battery.
    press volume up, if you got error volume down plus power button
   if didn't work maybe you are flashing this in different phone
 Tips:(cloudfone geo 402q have chipset issue some tools detects it as MT8382 but it is MT6582)

 but for me it didn't give me a problem 

7. Wait for the device to be detected, look at the status bar below of flashtool it will detect your device
 wait for it to flash the rom and wait the green circle to appear. indication that flashing was done.

boot your device!!! I hope this post helps you a lot.